Next I glued two small magnets 180 degrees apart on the edge of the diff plate. The sensor has to be mounted 1mm away from the spinning magnets.
Thursday 4 February 2010
Speed Sensor
My digital dashboard (more later) comes with a speed sensor which needs to be mounted on the propshaft or a driving wheel but must be fixed so that it moves with any movement of the prop. I have fabricated a small bracket to hold the sensor on the differential pointing at the side of the diff plate.
Next I glued two small magnets 180 degrees apart on the edge of the diff plate. The sensor has to be mounted 1mm away from the spinning magnets.
Next I glued two small magnets 180 degrees apart on the edge of the diff plate. The sensor has to be mounted 1mm away from the spinning magnets.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment